Aquapure Code 120. AquaPure™ AP904 Whole House Scale Reduction System the manual says the 120 code is "Low current in the forward section of Cell." The specs for the voltage and amp output for the Fusion Soft 700 are 22-30 VDC @ 3 AMPS maximum, and the. I ran the unit up to 100% at the time of the readings.
AquaPure™ AP801B Whole House System PLUS Carbon Block Filter from www.aquapurefilters.com
My Jandy Aquapure 1400 has started throwing 120/121 codes intermittently Most likely the cell has worn out in one direction and when it switches polarity it will either work or show the 120 code
AquaPure™ AP801B Whole House System PLUS Carbon Block Filter
If the cell is from 2011 I would say there is a 99% chance the cell. If the cell is from 2011 I would say there is a 99% chance the cell. I am sorry to hear about the codes on your Jandy Aquapure chlorinator
Aquapure Commercial RO System 400 GPD RO System AQUA PURE. Voltage was 35 VDC at both the board and at the cell Hello, I have a aqua pure 1400 with the code 170 I have cleaned the trisensor
Filters Cartridges & Spares Aquapure Aquapure Clear Sump AP11T 12. To troubleshoot any code, set the production to 100% and follow the steps below for that code If the cell is from 2011 I would say there is a 99% chance the cell.